Paletizátor Robopac Masterplat Plus PGS

ACHINE FEATURES:
The machine body consists of:
The base is constructed in pipe sections and plates in electro-welded steel, to have the required rigidity to withstand the forces developed by
the plate rotation. Thanks to the perforated pipe sections it is possible to lift the machine both at the front and at the rear. The housings for the
wheels supporting the plate are obtained in the structure. The wheels are covered with acetalic material in glass fibre matrix which assures a
low friction coefficient during the movement of the table, high stability of the machine, very high resistance to compression and deformation.
The whole guarantees top performance and low wear of the table's mobile parts. Driving takes place by means of a chain to prevent slippage
and assure absolute consistency in rotation.
Technical features: -Number of plate wheels: 28 (14 pairs) -Plate diameter: 1650 mm -Height of base (including disk thickness): 77.5 mm -Max. product dimensions: 1200x1000 mm -Max. load capacity: 2000 kg. -Adjustable table rotation speed: 5 # 12 rpm -Adjustable carriage up/ down speed: 1.4 # 4.0 m/ min’ -Forkability: front and rear - Supply voltage : 230 Volt 1 Ph +/- 10% - 50/ 60 Hz -Total installed power: 1.8 kW -Absorbed current: 5.9A
MAST:
The steel MAST is constructed in cold bent plate and has a compounded tubular structure that assures high resistance to torsion and bending,
making the MAST more resistant. Inside the MAST is the chain, highly resistant, that transmits the up and down motion to the carriage, assuring
optimal wrapping control.
Technical features:
Maximum useful height: 2200 mm
CARRIAGE PGS
Carriage with pre-stretch powered by one motor.
PSG pre-stretch carriage with fixed ratio motor-driven 250% pre-stretching, with manually interchangeable toothed wheels. The range of pre-
stretch values can be enlarged with optional 150% - 200% - 300% interchangeable gears. The force applied on the product is controlled by
means of a load cell on the return idle roller and the film stretch values can be set continuously from the control panel. The PGS carriage is
equipped with the patented "QLS" (Quick Load System) for fast film insertion between the rollers and the film unwinding button for film output
when it is attached to the product to be packed.
Technical characteristics of the reel:
Max external diameter (D): 300 mm
Height of film reel (h): 500 mm
Film thickness: 15-35 micron/ m
Internal diameter (d): 76 mm
Max weight: 20 kg