Rádiové diaľkové ovládanie Walvoil DPX100 + Scanreco G2B RC400 5 funkcií na stavebného stroja

Walvoil DPX 100 12/24 V hydraulic valve with 5 proportional sections and a valve for open/closed centre position, electro-hydraulic solenoids and additional levers; furthermore, a valve for the LS (Load Sense) pump with a closed centre position on the inlet section can be fitted.

In this setup, we can select which pads we wish to control at any given time and which should remain inactive. The selection is made via switch number 5; details can be found in the video below.

Scanreco G2B Mini 5-pad 12/24 V. Also available with 2 joysticks on special request.

This kit is configured for the most common machine set-ups and supports up to 5 standard functions of the self-loading side-loader trailer: 3 main crane functions and 2 support legs.

The pressure relief valve can also be adjusted as required. The solenoid type and flow rate can be selected individually to suit your application. Please send us a diagram so that we can assist you further.

The kit is designed for plug-and-play convenience. We take care of everything, from the connectors to the software configuration.

Technical support is available via email, WhatsApp and telephone.

If you have any questions or require assistance, please feel free to contact us at - or -.

---------------------- ---------------------------------------------------------------------------------------------------- -------------------------

Walvoil DPX 100 hydraulic section valve with compensation, fully proportional relief valve set to 230 bar (can be adjusted to factory specifications), sections with secondary compensation

Technical data for the standard configuration:

Inlet section: 32 GPM 120 l/min – Pmax 300 bar 4351 psi Power supply connection: 3/4‘ BPS, tank return connection: 3/4’ BPS + relief valve 24 V

1. Upper crane 80 L/min 21 GPM A+B partially open for pilot check valve, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

2. Lower crane 80 L/min 21 GPM A+B partially open for pilot check valve, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

3. Horizontal extension 60 L/min 16GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and a hand lever

4. Stabiliser leg 40 L/min 12 GPM A+B partially open for pilot check valve, electro-hydraulic control on both sides with AMP-JPT or Deutsch fittings and a hand lever

5. Stabiliser leg 40 L/min 12 GPM A+B partially open for pilot check valve, electro-hydraulic control on both sides with AMP-JPT or Deutsch fittings with hand lever

If you require a different custom configuration, we can tailor it to your requirements, including variations in spools, voltage, number of sections, anti-shock valves, connections, etc.


Outlet section: with the option to combine valves, with a vent valve (LS relief), with a pressure-reducing valve. Control connection ‘V’ and drain connection ‘L’ sealed. Side connections ‘T1’, ‘P1’, ‘LS1’ sealed. DBV fixed and sealed to 175 bar at 90 l/min.

Scanreco G2B Mini with 5 levers


- 1–5 linear levers

- Stop function in accordance with EN ISO 13849-1 Cat. 3, PL e

- Various toggle switches, pushbuttons and rotary switches

- Frequency bands: 433–434 or 902–928 MHz (other frequencies available on request)

- Operating range > 100 m / > ~330 ft.

Protection class: IP65

Operating temperature: 20 °C to +70 °C / ~4 °F to +160 °F
- Wired control: standard length 10 metres / ~33 feet.


- G2B receiver with PWM12 or 24 VDC power supply


- Choice of wireless or wired control

- 8 bidirectional proportional outputs

- All analogue outputs are programmable for final speed adjustment

- - 14 digital outputs (of which 1 is a combined input/output) and 4 digital inputs (of which 1 is a combined input/output)

- One DV output for controlling the drain valve

- Radio communication in the ISM band using frequency-hopping technology

- Manual mode available to bypass the radio system by providing only the DV output, thereby enabling manual control via the hydraulic manifold (where available).

- Programmable logic with block, soak, decelerate and ramp functions, and much more

- Please note that cable harnesses and connector sets are NOT included and must be ordered separately if required.

Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (excluding colour display)