Nový nožnicová automobilový zdvihák TyreON TSC3500X2 full rise scissorlift - hydraulic mechanical lock

Capacity 3500 kg - On floor
Lifting height 11,5 - 200 cm
Platform length 147 - 204 cm
Drive 3 kW Electric - Hydraulic
Type Fully automatic
► hydraulic mechanical safety lock
► No air - immediate descent
► Auto-stop at 25 cm + slow descend
► IR synchronization monitoring
► Own weight 950 kg
► Easy to install, automatic venting and platform leveling procedure
Including Floor bolts
A coded hydraulic hose set
Package L205 x B75 x H155 cm - 1000 kg
Voltage 400V or 230V
The internal hydraulic mechanical locks are making compressed air unnecessary and the immediate descent as the down button is pressed possible.
With 147 cm platforms all small cars can fit and the drive up ramps can be locked in the upward position to extend the platform length for longer vehicles up to 3500 kg.
Easy to use and maintain. Space-saving design, ideal with limited space.
TyreON TSC3500X2
Full rise scissorlift
TyreON supplies the TSC3500X2 with hydraulic mechanical technology, low maintenance and a safe immediate descent are characteristic of this technology.
Thanks to the laser detection, the lift stops at an uneven height of the platforms.
Solid double car scissor lift for professional intensive use
hydraulic mechanical lock with immediate descent
Low voltage control system with all-in-one control panel
The controller can be mounted on either side of the lift
Shears made of solid steel and ribbed drive up ramps
Tip-lever-lift system and finished with powder coating
CE certified and 1 year warranty on parts
Communicating cylinders, the lifting tables always go up and down exactly the same
Easy fast installation, automatic venting and platform leveling
Automatic venting and leveling
This low profile double scissor lift is easily fixed to the floor and linked to the control unit with the hose set. With one button in the control unit the hydraulic system is vented and the tables are leveled at the same time.
Other advantages
Rubber protection flaps on the hoses under the ramps
Easy car access thanks to the 63 cm wide tables and ramps with anti-slip profile
Silent 3 kW Italian made hydraulic pump
16A fuse in the control unit
The upward force and the descent speed are adjustable
A pressure relief valve prevents damage when the vehicle is too heavy
Protective hoods on all lifting cylinders
Reinforcement profiles on under the lifting platforms
Increased height of control console
Safety - Extra CE stop at a height of 25 cm
The lifting platforms are monitored with a laser. This monitoring serves two safety functions;
The lift stops immediately at a height difference of 1.5 cm or more between the two lifting platforms
The lift stops if a person walks between the tables during lifting or lowering
Other security provisions
Optical and acoustic signal when descending
Auto-stop at a height of 25 cm (The down button must be pressed again)
A height switch ensures that the engine stops when the lift reaches the highest point
Due to the hydraulic mechanical locking it is impossible for the lift to fall in the event of a hose break
Aluminum motor with cooling fins and fan against overheating
Procedure for lowering in the event of a power failure
On-off main switch with indicator light on the panel
The lift only functions if the laser on the control panel is switched on
Technique and the possibilities of the TyreON TSC3500X2 full rise car scissorlift
Technical details         
Lifting capacity 3500 kg    
Maximum lifting height 200 cm    
Initial drive on height 11,5 cm    
Time lifting / lowering 40 / 30 sec    
Platform length 147 - 204  (ramps up) cm  
Width platforms 63 cm    
Space between the lift platforms 75 - 90 (with the supplied hose set) cm    
         
Other information        
Type Electric - Hydraulic      
Engine power 3.0 kW    
Hydraulic working pressure 25 / 250  Mpa / Bar    
Voltage (50Hz) 400V/3Ph   or   230V/1Ph      
Ampere of fuse 16  Ampère    
Noiselevel